The DT-1 from Haas Automation, Inc., is a compact, high-speed drill and tap machine with full milling capabilities. The machine features a 20" x 16" x 15.5" work cube and 26" x 15" T-slot table while maintaining a small footprint. A BT-30 taper spindle spins to 12,000 RPM and allows tapping at speeds to 5,000 RPM. The spindle is coupled directly to the motor for smooth, quiet operation and extreme thermal stability, the company said. A 15 HP vector drive system provides 46 ft-lb (peak) of cutting torque for milling and boring operations.
The DT-1 provides cutting feedrates to 1,200 IPM for high-speed milling, and the machine's 20+1 side-mount tool changer swaps tools quickly to reduce non-cutting time. High-speed 2,400 IPM rapids combine with high acceleration rates to shorten cycle times and increase throughput, the company said.
For chip removal, the DT-1 features steeply sloped internal sheet metal. Optional twin chip augers transport chips to exit at the rear of the machine. A 45-gallon flood coolant system is standard with options for a programmable coolant nozzle and high-pressure through-spindle coolant systems.
For more information contact:
Haas Automation, Inc.
2800 Sturgis Road
Oxnard, CA 93030
800-331-6746
www.HaasCNC.com
Southwest
AR
Michael Garner
HFO - A Div. of
Jeffreys Mfg. Solutions
7123 Interstate 30, Ste. 30
Little Rock, AR 72209
501-562-8040
S. TX
Ronnie Dutton
HFO - A Division of
Champions Machine Tool
1151 E. Cypresswood
Spring, TX 77373
800-375-5673
281-355-9220
Central TX
Eric Foster
HFO - A Division of
Champions Machine Tool Sales
375 Commercial Drive
Buda, TX 78610
800-375-5673
LA
Pat Kane
HFO - A Div. of
Machine Tools, Inc.
914 W. Pont des Mouton Rd.
Lafayette, LA 70507
800-448-2084
N. TX
Michael Johns
HFO - A Div. of
CNC Machine Tools
11875 Forestgate Dr.
Dallas, TX 75243
972-231-2802
OK
Ken Timmons
HFO - A Div. of
Timco Machine Tools
1720 North Juniper Avenue
Broken Arrow, OK 74012
866-HAAS-CNC (422-7262)
NM
George Michel
HFO - Denver, A Div. of
Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
303-571-4933
mmt@mmtdenver.com
Southeast
TN
Michael Garner
HFO-Tennessee
1897 General George Patton Dr.
Franklin, TN 37068
615-599-5959
AL, NC, VA
C. Brooks Barwick
HFO - A Div. of Jeffreys Mfg. Solutions
8500 Triad Drive
Colfax, NC 27235
336-665-1080
SC
HFO - A Div. of Jeffreys Mfg. Solutions
501 Richardson Street, Suite A
Simpsonville, SC 29681
864-228-6760
GA
HFO Atlanta - A Div. of Jeffreys Mfg. Solutions
315 Curie Drive
Alpharetta, GA 30005-2264
678-297-9666
FL
Scott Myre
HFO - A Division of CNC Machine Tools
913 S US Hwy. 301 South
Tampa, FL 33619-4338
813-628-0665
MS
Don Dison
HFO - A Div. of Machine Tools, Inc.
276 N. Nissan Pkwy, Ste. C
Canton, MS 39046
800-448-2084
601-855-0480
Northeast
CT, MA, ME, NH, RI, VT
Nick Schuchardt
HFO - A Division of Trident
790 Marshall Phelps Road
Windsor, CT 06095
860-687-2466
E. NY, N. NJ, Long Island
Neil McGill
HFO - A Div. of Allendale Machinery Systems
16 Park Way
Upper Saddle River, NJ 07458
800-972-9401
800-224-0528
info@hfoallendale.com
www.HFOAllendale.com
W. PA
Tom Jonas
HFO - A Div. of DSM Machinery
549A Keystone Drive
Warrendale, PA 15086
724-778-3220
tj@gosiger.com
www.gosiger.com
WV
Dave Tucker
HFO - A Div. of Midwest Mfg. Resources
10165 International Blvd.
Cincinnati, OH 45246
513-874-8692
800-874-0160
dtucker@hfomidwest.com
W. NY, Central NY
Mike Cregg
HFO - A Division of NYMAT
2650 Baird Road
Fairport, NY 14450
585-641-4227
customeradvocate@nymat.com
DC, DE, MD, S. NJ, E. PA
Ed Kilgallon
HFO - A Div. of Lance Co.
3599 Marshall Lane, Unit A
Bensalem, PA 19020
215-245-5500
Midwest
N. IL, N.W. IN
HFO Chicago
555 Busse Road
Elk Grove Village, IL 60007
877-440-HAAS
www.hfochicago.com
E. MI
Fred Schultz
HFO - A Div. of Gerotech
29220 Commerce Dr
Flat Rock, MI 48134
734-379-7788
sales@hfogerotech.com
www.hfogerotech.com
W. MI
Tom Dawson
HFO - A Div. of Gerotech
2716 Courier Court N.W.
Grand Rapids, MI 49544
616-735-1100
sales@hfogerotech.com
www.hfogerotech.com
S. MI
HFO - A Div. of Gerotech
29220 Commerce Dr
Flat Rock, MI 48134
734-379-7788
sales@hfogerotech.com
www.hfogerotech.com
E. WI, U.P. MI
Mark MacVicar
HFO - A Division of Gosiger
3315 Intertech Dr.
Brookfield, WI 53045
262-373-5050
mmacvicar@gosiger.com
S. IN
Dave Tucker
HFO - A Div. of Midwest Mfg.
5733 West Minnesota St
Indianapolis, IN 46241
800-833-0246
dtucker@hfomidwest.com
N.E. IN
Dave Tucker
HFO - A Div. of Midwest Mfg.
2101 E. Coliseum Blvd.
ECTS Building, Room ET 137
Fort Wayne, IN 46809
800-833-0246
dtucker@hfomidwest.com
N. OH
Dave Tucker
HFO - A Div. of Midwest Mfg.
1993 Case Pkwy. N.
Twinsburg, OH 44087
800-833-0246
dtucker@hfomidwest.com
S. OH, KY
Dave Tucker
HFO - A Div. of Midwest Mfg.
7595 Innovation Way
Suite 100
Mason, OH 45040
800-833-0246
dtucker@hfomidwest.com
S. IL, E. MO
HFO - A Div. of NYMAT
136 Weldon Pkwy
St Louis, MO 63043
314-567-4227
hfo@nymat.com
W. MO, KS
HFO - A Division of NYMAT
15661 South Mahaffie St.
Olathe, KS 66062
913-768-HAAS (4227)
hfo@nymat.com
MN, W. WI, ND, SD
Greg Buck
HFO - A Div. of Productivity
15200 25th Ave N, Ste 120
Minneapolis, MN 55447
763-742-1263
hfomn@productivity.com
NE, W. IA
John Caskey
HFO - A Div. of Productivity
8402 S 117th St
Omaha, NE 68128
402-758-9143
jcaskey@productivity.com
E. IA
Dennis Smith
HFO - A Div. of Productivity
9440 Atlantic Dr.
Cedar Rapids, IA 52404
319-632-4294
dsmith@productivity.com
West
AZ, S. NV
Patrick Ellison
HFO-Phoenix, Div. Ellison Machinery Co.
1610 S. Priest Dr. #101
Tempe, AZ 85281
480-968-5877
sales@ellisonaz.com
CA (Los Angeles, Ventura Counties)
HFO-Torrance, Div. CNC Machine Tools
580 Madrid Ave
Torrance, CA 90502
310-381-0750
Cell: 760-390-9253
jphillips@haasfactoryoutlet.com
S. CA
HFO-Anaheim, Div Machining Time Savers Inc.
1338 S. State College Pkwy.
Anaheim, CA 92806
714-635-7373
sales@mtscnc.com
N. CA, N. NV
HFO-Union City, Div. Selway Machine Tool
29250 Union City Blvd.
Union City, CA 94587
888-735-9290
HFO@selwaytool.com
CO, WY
HFO-Denver, Div. Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
303-571-4933
mmt@mmtdenver.com
ID, MT
Larry McConnell
HFO-Boise, Div. King Machine Inc
443 W. Pennwood St.
Meridian, ID 83680
208-345-9600
kingmach@kingmach.com
OR
HFO-Portland, Div. Selway Machine Tool
25599 SW 95th Ave., Ste G.
Wilsonville, OR 97070
888-735-9290
HFO@selwaytool.com
UT
HFO-Salt Lake City, Div. Moncktons Machine Tools
3676 W. California Ave, Ste. A117
Salt Lake City, UT 84104
801-886-2221
mmt@mmtutah.com
WA
HFO-Seattle, Div. Selway Machine Tool
4108 B Place NW #A
Auburn, WA 98001
866-844-5400
HFO@selwaytool.com