Makino has released the latest version of its SuperSpark sinker EDM technology, SuperSpark IV. Building on the advancements of its predecessors, SuperSpark IV reduces roughing times in deep-rib applications by up to 30 percent, the company said.
"SuperSpark technology uses a combination of shortened jump cycles and spark-gap adaptive power control to improve process efficiency and productivity," said a company spokesperson. "Under standard sinker EDM jump cycles, more than 60 percent of total process time is spent out of the cut. SuperSpark more than doubles the actual cutting time because its shortened jump height requires less time for electrodes to return to the workpiece.
"In addition, its spark-gap adaptive power control enables electrodes to discharge sparks during the jump cycle for continuous cutting throughout the EDM process. As the electrode depth increases, the power and spark gap decreases to prevent overburn. Together, these technologies improve total machining times by 20 to 30 percent over standard sinker EDM technologies.
"SuperSpark IV builds on these core features for higher efficiency in deep ribs and drafted electrodes. With its adaptive jump functions and automatic calculation, and adjustment of machine power according to depth and draft, SuperSpark IV improves deep-rib machining efficiency over its predecessor.
"The original SuperSpark technology, introduced in 2001, enabled manufacturers to reduce overall roughing times. Subsequent versions have built on the technology's core benefits, providing additional improvements to roughing and finishing, particularly with tapered electrodes."
SuperSpark IV is available on all Makino sinker EDMs with MGH6 generator/control or later.
For more information contact:
Mark Rentschler
Makino Inc.
7680 Innovation Way
Mason, OH 45040
800-552-3288
www.makino.com
Southwest
TX
Andy Mustaine
Single Source Technologies
1701 W. Northwest Hwy.
Grapevine, TX 76051
877-778-5151
Andy.Mustaine@singlesourcetech.com
AR
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
256-301-0040
Bill.Myers@singlesourcetech.com
OK
KOMT
9511 E 55th Place
Tulsa, OK 74145
918-664-6064
Tulsa@komt.com
LA
Michelle Hanberry
c/o Oliver Van Horn Co.
4100 Euphrosine St.
New Orleans, LA 70125
504-210-3042
michelle-hanberry@ohvanhorn.com
NM
Moncktons Machine Tools, Inc.
928 Canvas Back Rd.
Rio Rancho, NM 87144
505-891-8845
hmorrismmt@aol.com
Southeast
NC, SC, VA
Dan Beckman, President
Beckman Precision, Inc.
415 Brookshire Road
Greer, SC 29651
864-801-8181
www.beckmanprecision.com
W. NC & SC
Chris Beckman
Beckman Precision, Inc.
415 Brookshire Road
Greer, SC 29651
877-510-6884
Cell: 864-346-9668
cbeckman@beckmanprecision.com
E. VA & Northeast NC
Bob Hodge
Beckman Precision, Inc.
1316 Elmwood Drive
Colonial Heights, VA 23834
804-520-4200
Cell: 804-720-2198
bhodge@beckmanprecision.com
E. SC & Southeast NC
Bob Winstanley
Beckman Precision, Inc.
396 Blue Stem Drive 58A
Pawleys Island, SC 29585
843-979-0576
Cell: 704-577-3391
bwinstanley@beckmanprecision.com
Central NC & VA
Dan Fredrickson
Area Sales Manager
Beckman Precision, Inc.
2936 Motsinger Rd.
Winston-Salem, NC 27107
864-801-8181
Cell: 336-831-4246
DFredrickson@beckmanprecision.com
AL, GA, MS, TN
Bill Myers
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
256-309-0404
bill.myers@singlesourcetech.com
www.singlesourcetech.com
AL
Jack Nash
Single Source Technologies (SST)
2030 Vestavia Park Lane, Apt. B
Vestavia Hills, AL 35216
205-824-2899
cell: 205-612-9371
jack.nash@singlesourcetech.com
FL
Bob Arthur
Robert Arthur Machinery, LLC
5903 Johns Rd.
Tampa, FL 33634
813-887-4455
sales@arthurmachinery.com
www.ArthurMachinery.com
Western TN, Upper MS
Tom Van Hersh
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
Cell: 901-569-2251
Upper GA and E. TN
Ken Brewer
Single Source Technologies (SST)
26762 Success Drive
P.O. Box 708
Madison, AL 35758
cell: 770-634-2243
GA
Bud Cowan
Single Source Technologies (SST)
4282 Marci Street
Snellville, GA 30039
770-267-9044
cell: 678-227-2588
bud.cowan@singlesourcetech.com
Northeast
MA, CT, ME, NH, RI, VT
Able Machine Tool Sales
800 Silver St.
Agawam, MA 01001
413-786-4662
sales@ablemts.com
www.ablemts.com
NJ, MD, E. PA, Long Island
Automation Solutions, Inc.
2 Hagerty Blvd, Ste 300
West Chester, PA 19382-4956
610-430-3670
inquire@asi-pa.com
www.asi-pa.com
NY, CT, DC, ME, MD, NJ (EDM only)
Single Source Technologies (SST)
30 Chapin Rd., Ste. 1208
PO Box 655
Pine Brook, NJ 07058-0655
800-336-7283 / 973-227-6601
www.SingleSourceTech.com
DE
Automation Solutions, Inc.
2 Hagerty Boulevard, Ste. 300
West Chester, PA 19382
610-430-3670
www.asi-pa.com
NY
Meagley Machinery, Inc.
8384 Glen Eagle Dr.
P.O. Box 51
Manlius, NY 13104
315-952-8525
PA, WV
Allegheny Machine
632 E. McMurray Rd.
McMurray, PA 15317
724-942-4451 / 800-269-4090
www.allegmach.com
Midwest
KY
Technical Equipment Sales
P.O. Box 99793
Louisville, KY 40269
800-852-0582
IN
Technical Equipment Sales
4501 Earhart Lane
Ft. Wayne, IN 46809
800-852-0582
OH
Technical Equipment Sales
10165 International Blvd.
Cincinnati, OH 45246
513-874-0160 / 800-852-0582
Technical Equipment Sales
8200 Sweet Valley Dr #106
Valley View, OH 44125
800-852-0582
MI
Single Source Technologies (SST)
2600 Superior Court
Auburn Hills, MI 48326
248-232-6232
ctg@singlesourcetech.com
MN, ND, SD
Productivity, Inc.
15150 25th Ave N
Minneapolis, MN 55447-1981
763-476-8600
productivity@productivity.com
WI
Preston Giles
Single Source Technologies (SST)
W229 N2510 Duplainville Rd, Unit 2
Waukesha, WI 53186
262-960-0844
IL
Jeff Martin
Single Source Technologies (SST)
1135 Jansen Farm Dr.
Elgin, IL 60123
874-468-1295
NE
Productivity, Inc.
13435 A Street
Omaha, NE 68144
402-330-2323
prone@productivity.com
IA
Productivity, Inc.
9440 Atlantic Drive SW
Cedar Rapids, IA 52404
319-632-4288
proia@productivity.com
KS
Mark Rehwinkel
Makino - Direct Wichita
2333 S. West St., Bldg #100, Ste. #103
Wichita, KS 67217
513-573-3607
mark.rehwinkel@makino.com
MO
Jeff Martin
SST-Midwest
1135 Jansen Farm Drive
Elgin, IL 60123
847-302-1178
jeff.martin@singlesourcetech.com
WEST
N. CA, NV
Paul Perata
Clancy Machine
3942 Valley Ave., Bldg. K
Pleasanton, CA 94566
925-249-2299
cell: 925-984-0040
pperata@clancymachinetool.com
S. CA
Bill Gocke
Makino - Direct LA
17800 Newhope Street, Ste. H-L
Fountain Valley, CA 92708-5429
513-573-4485
cell: 714-659-0552
Bill.Gocke@makino.com
AZ
Dave Gundersen
Makino - Direct LA
P.O. Box 93610
Phoenix, AZ 85070-3610
602-228-0347
david.gundersen@makino.com
MT, ID, WY, UT, WY, CO
Mark Smith
Moncktons Machine Tools (CO)
637 Osage Street
Denver, CO 80204
cell: 303-917-3072
msmith@mmtdenver.com
OR, WA
John Ellis
Ellis Machinery
6225 20th Street E
Fife, WA 98424
253-926-6868
cell: 206-255-6156
john@ellismachinery.com