Click here to watch Tutorial Videos >

CEA-Series Strain Gauges



Micro-Measurements, a Vishay Precision Group, Inc. (VPG) brand, has released three CEA-Series strain gauges designed to perform standard compression tests on polymer matrix composite materials. The new sensor patterns feature a configuration designed for any strain measurement requiring close proximity to one-sided features, such as weld joints, structural discontinuities or stress risers like holes and cracks.

"Structural designers have told us that finding the compression strength of composite materials is necessary and is the subject of ASTM Standard Test Method D6641," said Bob Watson, Director of Engineering, Micro-Measurements. "The loading device recommended for use in this standard provides a 12.7 mm (0.5 inch) test section length and a test section width range of 12.7 to 30 mm (0.5 to 1.2 inches), making our new UB pattern geometry ideal for this testing."

The 062UB, 125UB and 250UB patterns are designed with both solder tabs placed on one side of the linear sensing grid, which allows these foil strain sensors to be properly oriented on the composite specimen, keeping the sensing grid centered in the test zone.

Available in 350 ohm to minimize self-heating, the UB patterns are made in the CEA-Series construction, which features a thin, flexible cast polyimide carrier backing and encapsulation, and copper-coated solder tabs that enable quick and simple soldering. The UB patterns are also available with optional pre-attached lead wires, eliminating the chance of heat damage to the test specimen during soldering.

For more information contact:

Micro-Measurements

951 Wendell Blvd.

Wendell, NC 27591

919-365-3800

mm@vpgsensors.com

www.micro-measurements.com

< back