Measuring Heavy Workpieces from All Directions
March 1, 2017
The ScopeCheck MB from Werth Messtechnik GmbH was designed specifically for the measurement of large and heavy workpieces. The position of the sensors is adjusted with the moving bridge, so it is not necessary to move the workpiece during measurement. Standard measurement ranges from 500 to 2,000 mm in the X axis, up to 3,000 mm in the Y axis and up to 1,500 mm in the Z axis allow measurements on large-volume workpieces with a weight up to 5 tons. Due to the temperature compensation these multisensor coordinate measuring machines, equipped with air bearings, provide precise measurement results also in a production environment.
The integration of multisensor systems increases the machine's flexibility. The patented Werth Zoom is fully integrated in the Z ram of the measuring machine, providing unrestricted optical measurement capabilities. In addition to the Werth Zoom and tactile sensors, the IP 40 T rotating and tilting camera head can also be added along with a wide variety of additional sensor types. This makes it possible to optically measure large components from different directions automatically. Using a special exchange mechanism, the IP 40 T can also be equipped with the patented WFP Werth Fiber Probe. The Werth LLP laser line probe is available for rapid scanning and digitizing large components. All sensors are easily interchangeable using a park station in CNC mode. The optional back light allows stamped parts, films and other profiles to be measured throughout the entire measurement range of the machine.
The modular design allows the measuring machine to be easily expanded, even after installation, to meet future requirements.
For more information contact:
Werth, Inc.
8 Custom Drive
Old Saybrook, CT 06475
860-399-2445
info@werthinc.com
www.werthinc.com
< back