Click here to watch Tutorial Videos >

Time-Saving Tool Cleaning and Laser Marking Modules



WALTER HELICHECK PLUS and HELICHECK PRO machines feature robot loaders and tool cleaning and laser marking capabilities outside of the work area.

WALTER HELICHECK PLUS and HELICHECK PRO machines are capable of laser marking the tool shaft or end face with static or dynamic data.

WALTER HELICHECK PLUS and HELICHECK PRO machines thoroughly clean tools in an ultrasonic bath for maximum measurement validity.

To further increase efficiency of the manufacture and final inspection of cutting tools, WALTER HELICHECK PLUS and HELICHECK PRO machines from UNITED GRINDING North America now feature new modules for tool cleaning and laser marking. Both modules are incorporated into, and work in tandem with, the machine's robot loader to shorten overall production time.

Because cleanliness is essential for accurate measuring, the cleaning module runs tools through an ultrasonic bath. After the bath, an airstream-adjusted according to tool length-then dries the tools. After the tools are cleaned and measured, the laser-marking module imparts static or dynamic data on to tool shanks or end faces.

For complete flexibility, shops can opt to have the robot loaders for the HELICHECK PLUS and HELICHECK PRO prepped for eventually retrofitting the two modules either together or individually at a later date.

For more information contact:

UNITED GRINDING North America Inc.

2100 UNITED GRINDING Blvd.

Miamisburg, OH 45342

937-859-1975

info@grinding.com

www.grinding.com

< back