Browse by Editorial Category
Browse by Edition Date

May 2020

Skip Navigation Links.
Expand Applying TechnologyApplying Technology
Expand Automotive-Motorsports Mfg TechAutomotive-Motorsports Mfg Tech
Expand Current NewsCurrent News
Expand Cutting ToolsCutting Tools
Collapse Heat TreatingHeat Treating
Expand Literature-Web TutorialsLiterature-Web Tutorials
Expand Mold MakingMold Making
Expand People In The NewsPeople In The News

show all editions →

Click here to watch Tutorial Videos >

Blue M Ships Mechanical Convection Oven to Oil and Gas Industry



Thermal Product Solutions, a manufacturer of thermal-processing equipment, has announced the shipment of one Blue M Class A Mechanical Convection Oven to a company in the oil and gas industry.

This Blue M convection oven has a designated temperature range of 15 °C above ambient to 82 °C due to the large solvent load in the chamber. The interior of the work chamber itself has dimensions of 25 mm W x 20 mm D x 20 mm H. The oven will allow the customer to process products containing flammable vapors inside the oven while maintaining safe operating conditions. It features special construction that evacuates solvent vapors from the chamber as well as reducing ignition sources.

Special heaters were also installed to increase the heat output inside the chamber. This allows for a larger exhaust rate while maintaining ramp times and temperature within the working chamber. The horizontal air movement from left to right maximizes heating rates within the oven chamber.

"This particular oven was designed and reinforced to operate in an inverted position. The entire conditioning system, including the exterior exhaust system, was modified to incorporate the design change,"

said Jonathan Young, Product Manager.

Features of the Blue M Class A oven:

  • Differential pressure switches on the circulation and exhaust blowers
  • Fully welded 304L stainless steel interior liner
  • Quick access for simple inner chamber cleaning
  • Safety door switch that de-energizes the heaters and circulation upon opening the door
  • Emergency power off push button
  • Special inverted design to accommodate customer request
  • Additional heat to allow for additional solvent load in the chamber
  • Watlow PM temperature controller and high limit
  • Powered exhaust for removal of solvent vapors
  • UL labelled control panel
  • NFPA 86 Class A construction for safe use with flammable vapors.

For more information contact:

Thermal Product Solutions

2821 Old Route 15

New Columbia, PA 17856

800-586-2473 / 570-538-7200

info@thermalproductsolutions.com

www.thermalproductsolutions.com

< back